BEML LIMITED

CIN:L35202KA1964GOI001530

Government of India, Ministry of Defence

A Miniratna Category-1 Company

MAKE IN INDIA

Achievements

BEML LIMITED has been making continuous efforts in indigenising its product range and has achieved the same to a greater extent, truly depicting the Company's commitment to Govt., policy on 'Make in India' concept.

 
POWER TAKE OFF ASSEMBLY
  Product developed based on Reverse Engineering Based on the expertise available, Design / Drawings prepared
Material specification is based on the sample
  Features
  Power rating : 55 kW
Input: One
Output: Two (Hydraulic & Shaft)

 

FUEL INJECTION PUMP
Features 
High pressure pump- P Type 
Rated power: 300kW@1800 rpm 
Maximum torque: 1830 Nm @ 1200 rpm 
High idle speed: 2100±50 r/Min 
Low idle speed: 550±50 r/Min 
Emission compliance for EURO-II 

 

BG825 MOTOR GRADER TRANSMISSION CONTROL VALVE
Features:
Intricate castings were developed successfully in record time and the assembly was tested at BEML and all characteristics were matched with that of the  imported unit. Subsequently engineered on the transmission and further the unit is working on customer machine successfully for more than 500 hours.Further indigenous units are manufactured after the successful testing at site and positive feed back.

 

PAYLOAD MONITORING SYSTEM FOR DUMPERS                
Payload monitoring system is a micro controller based data acquisition system to measure, display and record the weight of the material being carried by truck and productivity information (Idle time, Empty travel time, Loading time, Loaded travel time, Loaded stop time, cycle distance, max. speed and average speed for haul and return cycle).
Payload Monitoring System for dump truck has been designed based on the principle of pressure developed in the hydraulics suspensions.Load is measured from each individual suspension. The load in the truck is converted digitally using Master control Unit to calculate the total payload.Each weighment details are recorded with respect to load status.

 

UNIFIED ELECTRONIC CONTROLLER FOR
BH100 DUMP TRUCK TRANSMISSION
Unified Electronic Controller (UEC) performs multiple functions and provides single point control of a dump truck including recording of productivity data with advanced diagnostics. UEC is designed to cater to all major functions like automated gear shifting, on board weighing, hoist control and vehicle monitoring system of off highway dump truck. The Electronic module is based on Field Programmable Gate Array (FPGA) technique is jointly developed with Electronic Research & Development Center of India, to develop state-of-the-art mechatronics system with a view to enhance vehicle safety and operator's comfort and ensure optimum loading and higher productivity.

 

STEERING & BRAKE CONTROLLER FOR DOZERS
To meet the customer requirement, for the first time in India, BEML has Designed and& Developed "Electronically operated proportional steering and brake control system for crawler dozers".The equipment has been tested thoroughly to meet the performance requirements of different customers and at different terrain conditions for optimized performance.
The control valve assembly components are designed keeping in view ease of manufacturability and serviceability. All the components viz., joysticks, controllers, and cartridge valves are standard components and are readily available from reputed sources globally.
BULK HEAD PANEL FOR METRO CARS
Made up of Aluminium frame, Aluminium honeycomb, Aluminium laminates skin
Features :
Excellent stiffness & Mechanical strength.
Good appearance & Better workability.
Good Impact resistance & fatigue Resistance.
Smooth & Flat surface.
Optimum strength to Weight Ratio.
Optimum stiffness to Weight Ratio.

BEML equipments designed and made in India

Defence
  • Smerch 10x10
  • Sarvatra Bridge System
Mining & Construction
  • BH205E - Dump Truck
  • BE1800E - Electrical Excavator
  • BL120H - Loader cum Excavator
Rail & Metro
  • Stainless Steel EMU
  • Overhead Inspection Car